Inhoudsopgave
Wat is Somfy RTS?
Radio Technology Somfy (RTS) is een eigen protocol voor draadloze communicatie van Somfy. Dit protocol wordt met name ingezet voor draadloze communicatie tussen zonwering en rolluiken. Net als io-homecontrol is RTS modulair uit te breiden, maar wel alleen met producten die ook voorzien zijn van de RTS-technologie.
Welke Somfy motor heb ik nodig?
Bereken zelf welke motor je nodig hebt voor je rolluik
| Motortype | Somfy artikelnummer | Trekkracht bij buis (kg – doorsnede in mm) |
|---|---|---|
| Altus RTS 6/17 | 1 032 452 | 24 kg – 50 mm |
| Altus RTS 10/17 | 1 037 436 | 40 kg – 50 mm |
| Altus RTS 15/17 | 1 039 379 | 60 kg – 50 mm |
| Altus RTS 20/17 | 1 041 426 | 80 kg – 50 mm |
How do I set up my Somfy remote for blinds?
You’re all set to start using your Somfy remote! Use the up and down buttons to control your blind and the my button to stop your blind moving. To set up your remote for multiple blinds including double and linked blinds, remember to follow steps 1 to 10 for each additional blind motor, one by one.
What are Somfy’s remote controls?
All Somfy remote controls All of Somfy’s control solutions Our range of remote controls for operating shades, blinds, screens, awnings, shutters, etc. Our remote controls come with several functions: centralized control, timers, individual or multi-device control, slat adjustment, intuitive interface etc. Find the perfect remote control for you!
How do I program my remote to make my blinds jog?
Hold down the my button for 2 seconds until the blind jogs. The control now has your upper and lower limits memorised. Grab a paperclip or pin and press the program button on the back of the remote for less than a second, which will make your blinds jog.
How do I program the pinhole motor to my Somfy remote?
If you are not able to locate the pinhole, please contact Somfy customer service at 1-800-22SOMFY. Once the pinhole on the motor has been located, insert a paperclip for one jog (which is a quick up and down motion) and then let go. Next, locate your remote and select the channel (if mult-channel) that you’d like to program to operate the motor.
